Tecno H5 not recongnized by Spflashtool
Tecno H5 not recongnized by Spflashtool
(06-07-2019, 07:29 AM)osmartventures I have this issue with Tecno h5 actually it was bricked so I downloaded the stockrom and did a format on it with spflash tool using download+format, it was successfully but on booting the phon it’s image where showing half so I decided to format and re download the rom with spflash tool . I made a Mistake click format whole instead of except bootloader now my big issue is spflash tool cant read the phone anymore once plugged in the DA won’t read.You formatted the preloaded.
It just stays that way till I unplug the usb then pops up an error phone could not be read possible boot up too fast
Tried uninstalling all drivers and reinstalling same issue
A screenshot attached
(06-07-2019, 07:29 AM)osmartventures I have this issue with Tecno h5 actually it was bricked so I downloaded the stockrom and did a format on it with spflash tool using download+format, it was successfully but on booting the phon it’s image where showing half so I decided to format and re download the rom with spflash tool . I made a Mistake click format whole instead of except bootloader now my big issue is spflash tool cant read the phone anymore once plugged in the DA won’t read.
It just stays that way till I unplug the usb then pops up an error phone could not be read possible boot up too fast
Tried uninstalling all drivers and reinstalling same issue
A screenshot attached
(06-07-2019, 11:42 AM)X3non(06-07-2019, 07:29 AM)osmartventures I have this issue with Tecno h5 actually it was bricked so I downloaded the stockrom and did a format on it with spflash tool using download+format, it was successfully but on booting the phon it’s image where showing half so I decided to format and re download the rom with spflash tool . I made a Mistake click format whole instead of except bootloader now my big issue is spflash tool cant read the phone anymore once plugged in the DA won’t read.
It just stays that way till I unplug the usb then pops up an error phone could not be read possible boot up too fast
Tried uninstalling all drivers and reinstalling same issue
A screenshot attached
try @SachinBorkar's suggestion ; for the 2nd suggestion see https://www.hovatek.com/forum/thread-14106.html for how to flash using miracle box
before you started all this flashing, did you confirm if your H5 is old or new?
Thanks boss i flashed it and its up and running now but i noticed it dosent detects sim on sim slot one but sim 2 dectects but no network.. Please bosses how can i sort this issues i have tried writing the imei with SN write tool but it still the same and also i checked the imei via *#06# only a single imei number poping up. Thanks in advance.
(06-07-2019, 11:59 AM)osmartventuresSome settings are missed up while writing imei I don't remember exactly what they are.(06-07-2019, 11:42 AM)X3non(06-07-2019, 07:29 AM)osmartventures I have this issue with Tecno h5 actually it was bricked so I downloaded the stockrom and did a format on it with spflash tool using download+format, it was successfully but on booting the phon it’s image where showing half so I decided to format and re download the rom with spflash tool . I made a Mistake click format whole instead of except bootloader now my big issue is spflash tool cant read the phone anymore once plugged in the DA won’t read.
It just stays that way till I unplug the usb then pops up an error phone could not be read possible boot up too fast
Tried uninstalling all drivers and reinstalling same issue
A screenshot attached
try @SachinBorkar's suggestion ; for the 2nd suggestion see https://www.hovatek.com/forum/thread-14106.html for how to flash using miracle box
before you started all this flashing, did you confirm if your H5 is old or new?
Thanks boss i flashed it and its up and running now but i noticed it dosent detects sim on sim slot one but sim 2 dectects but no network.. Please bosses how can i sort this issues i have tried writing the imei with SN write tool but it still the same and also i checked the imei via *#06# only a single imei number poping up. Thanks in advance.
(06-07-2019, 12:01 PM)SachinBorkarHow can I sort out these missed up settings boss(06-07-2019, 11:59 AM)osmartventuresSome settings are missed up while writing imei I don't remember exactly what they are.(06-07-2019, 11:42 AM)X3non(06-07-2019, 07:29 AM)osmartventures I have this issue with Tecno h5 actually it was bricked so I downloaded the stockrom and did a format on it with spflash tool using download+format, it was successfully but on booting the phon it’s image where showing half so I decided to format and re download the rom with spflash tool . I made a Mistake click format whole instead of except bootloader now my big issue is spflash tool cant read the phone anymore once plugged in the DA won’t read.
It just stays that way till I unplug the usb then pops up an error phone could not be read possible boot up too fast
Tried uninstalling all drivers and reinstalling same issue
A screenshot attached
try @SachinBorkar's suggestion ; for the 2nd suggestion see https://www.hovatek.com/forum/thread-14106.html for how to flash using miracle box
before you started all this flashing, did you confirm if your H5 is old or new?
Thanks boss i flashed it and its up and running now but i noticed it dosent detects sim on sim slot one but sim 2 dectects but no network.. Please bosses how can i sort this issues i have tried writing the imei with SN write tool but it still the same and also i checked the imei via *#06# only a single imei number poping up. Thanks in advance.
Sent from my Titanium Vista 4G using Tapatalk
(06-07-2019, 12:13 PM)osmartventuresIn SN Flash tool there are tick on dual imei.(06-07-2019, 12:01 PM)SachinBorkarHow can I sort out these missed up settings boss(06-07-2019, 11:59 AM)osmartventuresSome settings are missed up while writing imei I don't remember exactly what they are.(06-07-2019, 11:42 AM)X3non(06-07-2019, 07:29 AM)osmartventures I have this issue with Tecno h5 actually it was bricked so I downloaded the stockrom and did a format on it with spflash tool using download+format, it was successfully but on booting the phon it’s image where showing half so I decided to format and re download the rom with spflash tool . I made a Mistake click format whole instead of except bootloader now my big issue is spflash tool cant read the phone anymore once plugged in the DA won’t read.
It just stays that way till I unplug the usb then pops up an error phone could not be read possible boot up too fast
Tried uninstalling all drivers and reinstalling same issue
A screenshot attached
try @SachinBorkar's suggestion ; for the 2nd suggestion see https://www.hovatek.com/forum/thread-14106.html for how to flash using miracle box
before you started all this flashing, did you confirm if your H5 is old or new?
Thanks boss i flashed it and its up and running now but i noticed it dosent detects sim on sim slot one but sim 2 dectects but no network.. Please bosses how can i sort this issues i have tried writing the imei with SN write tool but it still the same and also i checked the imei via *#06# only a single imei number poping up. Thanks in advance.
Sent from my Titanium Vista 4G using Tapatalk
(06-07-2019, 11:59 AM)osmartventures Thanks boss i flashed it and its up and running now but i noticed it dosent detects sim on sim slot one but sim 2 dectects but no network.. Please bosses how can i sort this issues i have tried writing the imei with SN write tool but it still the same and also i checked the imei via *#06# only a single imei number poping up. Thanks in advance.