Join us on Tl   Wh

Hovatek Forum MOBILE Android need firmware j6 pro clone

need firmware j6 pro clone

need firmware j6 pro clone

Ricardo Richie
Ricardo Richie
3
20-12-2018, 02:55 PM
#1



please forum help me i have this copy of samsung sm-j6 pro clone so its hang on logo please i need firmware to soft this matter
this is the logs below

Wait for phone...
Phone found! [ 6 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A4834473164040508A1A654714B
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , d1G4
[eMMC] : FLASH_CID : 90014A4834473164040508A1A654714B
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
DEV RID : 0xFD783269F45F97F598F851187B1AE91E
INT RAM : 0x00020000
EXT RAM : 0x20000000 [512 MiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[AP] : Initial info read Ok!

Brand : Samsung
ProdName : SM-J6 Pro
ProdModel : SM-J6 Pro
Device : SM-J6 Pro
AndroidVer: 7.1.1
MTKxCPU : MT6580
MTKxPRJ : ALPS.L1.MP6.V2_AEON6580.WEG.L_P73

Done!
Elapsed: 00:00:10
Reconnect Power/Cable!
xerxes
xerxes
xerxes
Senior Member
8,357
20-12-2018, 10:56 PM
#2
(20-12-2018, 02:55 PM)Ricardo Richie please forum help me i have this copy of samsung sm-j6 pro clone so its hang on logo please i need firmware to soft this matter
this is the logs below

Wait for phone...
Phone found! [ 6 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A4834473164040508A1A654714B
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , d1G4
[eMMC] : FLASH_CID : 90014A4834473164040508A1A654714B
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
DEV RID : 0xFD783269F45F97F598F851187B1AE91E
INT RAM : 0x00020000
EXT RAM : 0x20000000 [512 MiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[AP] : Initial info read Ok!

Brand : Samsung
ProdName : SM-J6 Pro
ProdModel : SM-J6 Pro
Device : SM-J6 Pro
AndroidVer: 7.1.1
MTKxCPU : MT6580
MTKxPRJ : ALPS.L1.MP6.V2_AEON6580.WEG.L_P73

Done!
Elapsed: 00:00:10
Reconnect Power/Cable!

How did the problem start?
Backup the phone's current firmware, it's very important.

Sent from my M5 mini using Hovatek Mobile
EMMANUS
EMMANUS
EMMANUS
Senior Member
1,677
21-12-2018, 07:58 AM
#3
Also, have you tried a factory reset from recovery?
This post was last modified: 21-12-2018, 08:01 AM by EMMANUS.
Ricardo Richie
Ricardo Richie
3
21-12-2018, 10:27 AM
#4
(21-12-2018, 07:58 AM)EMMANUS Also, have you tried a factory reset from recovery?

i have done factory reset time and again to no avail i have already done the backup with miracle box 
so right now i need the firmware to flash the whole system
Ricardo Richie
Ricardo Richie
3
21-12-2018, 10:40 AM
#5



(21-12-2018, 07:58 AM)EMMANUS Also, have you tried a factory reset from recovery?

i have done factory reset time and again to no avail i have already done the backup with miracle box 
so right now i need the firmware to flash the whole system
hovatek
hovatek
hovatek
Administrator
49,755
21-12-2018, 04:25 PM
#6
(21-12-2018, 10:40 AM)Ricardo Richie i have done factory reset time and again to no avail i have already done the backup with miracle box 
so right now i need the firmware to flash the whole system

ran a quick search, the results all require some sort of payment
do you have access to a working J6 pro clone?

try this file at [ Login to download]
flash only boot and system
MrBlue
MrBlue
MrBlue
Newbie
1
13-02-2019, 05:27 PM
#7
(21-12-2018, 04:25 PM)I need a traslator for chinesse ::DCan you upload to mega.nz please. X3non
(21-12-2018, 10:40 AM)Ricardo Richie i have done factory reset time and again to no avail i have already done the backup with miracle box 
so right now i need the firmware to flash the whole system

ran a quick search, the results all require some sort of payment
do you have access to a working J6 pro clone?

try this file at [ Login to download]
flash only boot and system
xerxes
xerxes
xerxes
Senior Member
8,357
13-02-2019, 08:33 PM
#8
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
Join us
WhTlYt