Hovatek Forum MOBILE Android [Tool] I need help flashing my Lava Flair Z1
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


[Tool] I need help flashing my Lava Flair Z1

[Tool] I need help flashing my Lava Flair Z1

Pages (2): 1 2 Next
Sumit Pathak
Sumit Pathak
Sumit Pathak
Enthusiastic Member
6
27-02-2018, 03:41 PM
#1



I hard bricked my Lava Flair Z1. I wanted to flash stock rom. I used research or upgrade tool. As I connect my device, after nearly 40s my device gets disconnected and user cancel error is shown. I think it is due to drivers.
X3non
X3non
X3non
Recognized Contributor
22,062
27-02-2018, 06:52 PM
#2
(27-02-2018, 03:41 PM)Sumit Pathak I hard bricked my Lava Flair Z1. I wanted to flash stock rom. I used research or upgrade tool. As I connect my device, after nearly 40s my device gets disconnected and user cancel error is shown. I think it is due to drivers.

did you try the fix listed for that error @ https://www.hovatek.com/forum/thread-4870.html ?
Sumit Pathak
Sumit Pathak
Sumit Pathak
Enthusiastic Member
6
28-02-2018, 10:09 AM
#3
Yes, I have tried that but nothing works..
X3non
X3non
X3non
Recognized Contributor
22,062
28-02-2018, 02:42 PM
#4
(28-02-2018, 10:09 AM)Sumit Pathak Yes, I have tried that but nothing works..

[in details] how exactly did you attempt to flash?
Sumit Pathak
Sumit Pathak
Sumit Pathak
Enthusiastic Member
6
01-03-2018, 09:31 AM
#5



(28-02-2018, 02:42 PM)X3non
(28-02-2018, 10:09 AM)Sumit Pathak Yes, I have tried that but nothing works..

[in details] how exactly did you attempt to flash?

I wanted to flash stock room (.pac). So I used Upgrade/Research tool. I connected my device and the driver installed was "SCI USB2SERIAL DIAG (com3)". The process started after 40sec. the device automatically disconnected. The tool gave me a user cancel error. It happens every time. I have tried different ports, different USB cables, different drivers but nothing works....
xerxes
xerxes
xerxes
Senior Member
8,355
01-03-2018, 01:40 PM
#6
(01-03-2018, 09:31 AM)Sumit Pathak
(28-02-2018, 02:42 PM)X3non
(28-02-2018, 10:09 AM)Sumit Pathak Yes, I have tried that but nothing works..

[in details] how exactly did you attempt to flash?

I wanted to flash stock room (.pac). So I used Upgrade/Research tool. I connected my device and the driver installed was "SCI USB2SERIAL DIAG (com3)". The process started after 40sec. the device automatically disconnected. The tool gave me a user cancel error. It happens every time. I have tried different ports, different USB cables, different drivers but nothing works....

Did you take note of the phone's build no. before it got bricked?
This post was last modified: 02-03-2018, 12:32 PM by xerxes.
Sumit Pathak
Sumit Pathak
Sumit Pathak
Enthusiastic Member
6
01-03-2018, 03:05 PM
#7
(01-03-2018, 01:40 PM)innagee
(01-03-2018, 09:31 AM)Sumit Pathak
(28-02-2018, 02:42 PM)X3non
(28-02-2018, 10:09 AM)Sumit Pathak Yes, I have tried that but nothing works..

[in details] how exactly did you attempt to flash?

I wanted to flash stock room (.pac). So I used Upgrade/Research tool. I connected my device and the driver installed was "SCI USB2SERIAL DIAG (com3)". The process started after 40sec. the device automatically disconnected. The tool gave me a user cancel error. It happens every time. I have tried different ports, different USB cables, different drivers but nothing works....

Did you take note of the phone's build no. before it get bricked?

No
X3non
X3non
X3non
Recognized Contributor
22,062
01-03-2018, 03:56 PM
#8
(01-03-2018, 03:05 PM)Sumit Pathak No

try holding down the vol down button until the flashing process is complete
also try a different PC
Sumit Pathak
Sumit Pathak
Sumit Pathak
Enthusiastic Member
6
02-03-2018, 06:56 AM
#9
Try holding down the vol down button until the flashing process is complete
also try a different PC
[/quote]

I have tried holding the vol. Down button but it doesn't work. But I will try a different PC.
Sumit Pathak
Sumit Pathak
Sumit Pathak
Enthusiastic Member
6
02-03-2018, 05:39 PM
#10



(02-03-2018, 06:56 AM)Sumit Pathak Try holding down the vol down button until the flashing process is complete
also try a different PC

I have tried holding the vol. Down button but it doesn't work. But I will try a different PC.
[/quote]

Tried a different PC with different version of Windows. Unfortunately, didn't work. Quite frustrated!!! Device disconnected after 61sec.
Pages (2): 1 2 Next
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram