target_pause_for_battery_charge
target/msm8953/init.c
target_panel_auto_detect_enabled
target/msm8953/meminfo.c
target_panel_clock
[boards_verison]: pmic_adc_get_value adc num %d get error 
[boards_verison]: pmic_adc_get_value adc value %d over 1800 
vivo_get_usbin_uv_rt_sts =%d 
mdtp: mdtp_get_target_efuse: ERROR, target_efuse is NULL
Failed to get %s
only one gadget supported
udc has no gadget registered
%s: Failed to get DLL lock: 0x%08x
Failed to get tuned phase
Get card status failed
mmc_get_emmc_id %08x%08x%08x%08x
Failure getting card's ExtCSD information!
Failure getting OCR response from MMC Card
Failure getting card's CID number!
Failure getting card's RCA!
Failure getting card's CSD information!
Failure getting card's SCR register
Failed to get SSR from the card
[VSM] get eMMC health report Failed 
Failed to get card status after erase
Failed to get status of write protect bits
Failed to get card status afterapplying write protect
Failed to get card status after rpmb operations
QSEEcom command for getting keymaster version returned error: %d
boot_verifier: verification failure due to target name mismatch
target
ERROR: dtbo parition failed to get offset. 
ERROR: Unable to get boot partition size
do_sha_update returns error from crypto_get_digest
crypto_get_digest status error
DEPCMD_CMD_GET_EP_STATE   
gadget
only one gadget supported
GET_STATUS
GET_DESCRIPTOR
GET_CONFIGURATION
GET_INTERFACE
ERROR: Couldn't get the pmic type
ERROR: Get battery voltage failed!!!
get_cmdline_element
get_cmd_line ==%s
Cmdline get product.version failed...
get_unlock_ability: %d
error: cmd_get_backup_info no arg..
get oem op_entry:%s, default_op_entry:%s
get oem product_model:%s
cmd_oem_get_device_id verify_sha= %s
cmd_oem_get_device_id verify_key_version= %s
cmd_oem_get_device_id is %s
getimage: invalid parameters
failed to get ffbm cookie
flashing get_unlock_ability
oem get-info
getvar:
getid
NET_GET_FAILED
fastboot unlock return NET_GET_FAILED...
fastboot unlock get sigdata is NULL, error...
vivo_get_bsptest_debug Parameter exception
Invalid size argument passed to get_ffbm
Misc partition not supported for NAND targets.
mdtp: mdtp_fwlock_verify_lock: ERROR, cannot get enabled fuse
mdtp: is_test_mode: qsee_get_secure_state returned error: %d, status.value[0]: %d
mdtp: read_test_fuse: Failure getting metadata
mdtp: read_QFPROM_fuse: failed to get target eFuse
mdtp: mdtp_fuse_get_enabled: Failure in reading fuse
Target panel init not found!
%s: n1div is out of ranget:%d
%s: n2div is out of ranget:%d
pm8x41_chg_get_usb_type
Error getting battery Voltage
Error: Getting battery voltage based Soc
Invalid avdd target voltage specified 
failed to find target %04x
failed to find target-path %s
failed to overlay node %s to target %s
target-path
ufdt_get_fixup_location
Failed to get new_node because tree is NULL
ufdt_get_node_by_path_len
gethostbyname
getservbyname
int_thread_get (err.c)
int_err_get (err.c)
bad get asn1 object call
ac-targeting
id-cmc-getCert
id-cmc-getCRL
targetInformation
X509v3 AC Targeting