MTK Flash/Exploit Client V1.6.3 (c) B.Kerler 2018-2023

Preloader - Status: Waiting for PreLoader VCOM, please connect mobile

Port - Hint:

Power off the phone before connecting.
For brom mode, press and hold vol up, vol dwn, or all hw buttons and connect usb.
For preloader mode, don't press any hw button and connect usb.
If it is already connected and on, hold power for 10 seconds to reset.


...........
Port - Device detected :)
Preloader -     CPU:                    MT6753()
Preloader -     HW version:             0x0
Preloader -     WDT:                    0x10212000
Preloader -     Uart:                   0x11002000
Preloader -     Brom payload addr:      0x100a00
Preloader -     DA payload addr:        0x201000
Preloader -     CQ_DMA addr:            0x10217c00
Preloader -     Var1:                   0x28
Preloader - Disabling Watchdog...
Preloader - HW code:                    0x337
Preloader - Target config:              0x0
Preloader -     SBC enabled:            False
Preloader -     SLA enabled:            False
Preloader -     DAA enabled:            False
Preloader -     SWJTAG enabled:         False
Preloader -     EPP_PARAM at 0x600 after EMMC_BOOT/SDMMC_BOOT:  False
Preloader -     Root cert required:     False
Preloader -     Mem read auth:          False
Preloader -     Mem write auth:         False
Preloader -     Cmd 0xC8 blocked:       False
Preloader - Get Target info
Preloader - BROM mode detected.
Preloader -     HW subcode:             0x8a00
Preloader -     HW Ver:                 0xca00
Preloader -     SW Ver:                 0x0
Preloader - ME_ID:                      1693BD4905D9A9206E6ADA8784FE4D75
DA_handler - Device is unprotected.
DA_handler - Device is in BROM-Mode. Bypassing security.
PLTools - Loading payload from mt6753_payload.bin, 0x258 bytes
Exploitation - Kamakiri Run
Exploitation - Done sending payload...
PLTools - Successfully sent payload: C:\Users\6blac\Documents\FOR-THE-ANDROID-MP3-PLAYER\REQUIREMENTS\mtkclient-main\mtkclient\payloads\mt6753_payload.bin
Port - Device detected :)
DALegacy - Uploading legacy da...
DALegacy - Uploading legacy stage 1 from MTK_AllInOne_DA_5.2228.bin
legacyext - Legacy DA2 is patched.
legacyext - Legacy DA2 CMD F0 is patched.
Preloader - Jumping to 0x200000
Preloader - Jumping to 0x200000: ok.
DALegacy - Got loader sync !
DALegacy - Reading nand info
DALegacy - Reading emmc info
DALegacy - ACK: 04029b
DALegacy - Setting stage 2 config ...
DALegacy - DRAM config needed for : 484a019061344741661ca5320d165a3c
DALegacy - Reading dram nand info ...
DALegacy - Sending dram info ...
DALegacy - RAM-Length: 0xbc
DALegacy - Checksum: A054
DALegacy - M_EXT_RAM_RET : 0
DALegacy - M_EXT_RAM_TYPE : 0x2
DALegacy - M_EXT_RAM_CHIP_SELECT : 0x0
DALegacy - M_EXT_RAM_SIZE : 0x80000000
DALegacy - Uploading stage 2...
DALegacy - Successfully uploaded stage 2
DALegacy - Connected to stage2
DALegacy - Reconnecting to stage2 with higher speed