Hovatek Forum

also i am using sp flash tool 5.1924

the flash tool is working fine but it gives a error and asks for verified boot.img or disable verified boot help please it reaches till the flash is intalling yellow bar

how do i disable verified boot i tried hxd editor it cannot find the hex-values you gave and i also used miracle box with loader.exe it gives error about compound what should i do ?

this is what i am getting while doingthe bypass

https://imgur.com/a/myWhqwn

(20-05-2021, 11:18 AM)Agrim Wrote: [ -> ]also i am using sp flash tool 5.1924

storage life cycle should be available on this version of spft

(21-05-2021, 04:40 AM)Agrim Wrote: [ -> ]how do i disable verified boot i tried hxd editor it cannot find the hex-values you gave and i also used miracle box with loader.exe it gives error about compound what should i do ?

flash all partitions one after the other (take note of which partitions give the verified error)

(21-05-2021, 06:34 AM)Agrim Wrote: [ -> ]this is what i am getting while doingthe bypass

https://imgur.com/a/myWhqwn

disconnect your device, power off and retry the entire procedure again
alternatively, run main.py again then hold your boot key(s) + power button until the device is re-detected in device manager as mtk usb port

please reply ffast i used miracle box and it says "The Boot not support the Phone, or CPU Bad. Select other Boot." this is exactly what it says

(21-05-2021, 03:29 PM)Agrim Wrote: [ -> ]please reply ffast i used miracle box and it says "The Boot not support the Phone, or CPU Bad. Select other Boot." this is exactly what it says

can't use miracle thunder unless you have a working DA file

i have a working da file where to put it

(22-05-2021, 05:10 PM)Agrim Wrote: [ -> ]i have a working da file where to put it

see https://www.hovatek.com/forum/thread-23733.html